O-ESD v0.5 BOM

MECHANICAL SUPPORT:
Component                                  Quantity
---------------------------------------------------
1. Acrylic glass, laser cut, 6mm support          1 

GRIP:
Component                                  Quantity
---------------------------------------------------
1. PCB (grip)                                     1
2. Battery 18650 (3.7V)                           2
3. Battery holder for 18650                       2    
4. Push button                                    1
4. Switch                                         1
5. Battery charger [optional]                     2
6. Screw M3/16mm (plastic)                        4
7. Bolt M3 (plastic)                              4
8. Spacers 5mm (plastic) for M3 screws            4

CASCADE:
Component                                  Quantity
---------------------------------------------------
1. PCB (cascade)                                  1
2. Diode BY6 (6kV reverse breakdown voltage)     16
3. Capacitor 1nF (10kV)                          15
4. Silicone insulated wire, 12cm                  3
   (for connection with MCU & shaper)
5. Screw M3/16mm (plastic)                        4
6. Bolt M3 (plastic)                              4
7. Spacers 5mm (plastic) for M3 screws            4

SHAPER:
Component                                  Quantity
---------------------------------------------------
1. PCB (shaper)                                   1
2. Resistor 1MOhm  (10kV)                         1
3. Resistor 130Ohm (10kV)                         1
4. Resistor 220Ohm (10kV)                         1
5. Transistor (BJT) NPN TIP122                    1
6. High-voltage reed relay HM05-1A69-08           1
7. Diode 1N4007                                   1
9. Screw M3/16mm (plastic)                        5
10.Bolt M3 (plastic)                              5
11.Spacers 5mm (plastic) for M3 screws            5
12.Flat cable header MC9A12 17x2                  2
13.Resistor 10kOhm                                2
14.Resistor 150kOhm                               1
15.Resistor 330Ohm                                1
16.Resistor 1GOhm (30kV)                          1
17.Discharge tip (sharp)                          1
18.Discharge tip (rounded)                        1
19.Socket for 4mm connectors, isolated            1
20.Crocodile clamp 55mm                           1
21.Flat cable 2m, 32 wires                        1
22.PCB for crocodile-clamp-to-flat-cable          1 

MICROCONTROLLER UNIT (MCU):
Component                                  Quantity
---------------------------------------------------
1. PCB (MCU)                                      1
2. Arduino Nano v3                                1
3. LCD 20x4 NHD-0420DZ-FL-YBW                     1 
4. Push button (dual, PCB mount)                  2
5. Rotary Encoder (PCB mount)                     1
6. Capacitor 2.2mF (more than one is optional)    5
7. Capacitor 1nF                                  1
8. Capacitor 3.3nF                                1
9. Capacitor 2.2nF                                3
10.Resistor 75kOhm                                2
11.Resistor 330Ohm                                1
12.Resistor 0.1Ohm (optional/for testing)         1
13.Resistor 10kOhm                                5
14.Potentiometer 10kOhm                           1
15.Transistor (BJT) NPN TIP122                    1
16.Screw M2.5/16mm (metallic)                     4
17.Bolt M2.5 (metallic)                           4
18.Spacers 5mm (plastic) for M3/M2.5 screw        4  
19.Isolated wire, approx. 3cm                     4
   (for connection with grip)
   
   CURTOM-MADE TRANSFORMER:
20.Transformer core ETD49/25/16 N87AL 3800NH      2
21.Transformer ETD49/25/16 coil former            1
22.Transformer ETD49/25/16 Yoke                   2
23.Transformer insulation paper 0.2mm (sheet)     1
24.Wire AWG34/0.16mm dia., 2630V HY,       
   12 layers, 0.2 isolation between layers
   secondary: total number of wire turns       1875
   (about 156 turns per layer)
25.Wire AWG18/1.02mm dia., 5130V HY, 
   primary: total number of wire turns            4