O-ESD/Hardware_development/Measurements/v01/Push_pull_2.txt

58 lines
1.6 KiB
Plaintext
Raw Normal View History

2025-01-22 19:21:18 +01:00
freq - frequency in Hz
3.70 - excitation from one battery (3.7V)
7.40 - excitation from two batteries in series (7.40V)
In no case the current from excitation is allowed to go above 2A. In no experiment the current is observed to be above 1.5A.
The results in tables are output voltages measured at 1000:1 HV probe, hence the output voltage is given in kV.
Push-pull configuration with two TIP122 NPN transistor with 330 Ohms resistor in base is used.
2025-01-22 19:21:18 +01:00
Double cascade is used with 16 capacitors and 16 BY6 diodes (8 of each per side).
Power supplied by RIGOL DP832 at frequency for max output DC voltage is measured, too.
ETD49 core with 4 isolated layers as secondary, no gaps, 2x3-turn primary
freq 3.70 7.40
------------------
1k 2.51 3.89
2k 3.62 6.09
3k 4.23 7.95
4k 4.65 9.18
5k 4.91 9.77
6k 5.08 10.16
7k 5.19 10.35
8k 5.24 10.47
9k 5.28 10.56
10k 5.29 10.61
15k 5.09 10.46
20k 4.70 10.02
25k 4.38 9.58
30k 4.16 9.20
35k 4.09 9.13
Max power @10kHz / 3.7V = 2.00W
Max power @10kHz / 7.4V = 7.39W
Trafo #3 (Git repository > Hardware development > 4-HV > Trafos)
freq 3.70 7.40
------------------
1k 4.46 8.60
2k 5.51 11.88
3k 6.12 15.20
4k 6.31 17.60
5k 6.43 18.15
6k 7.11 19.82
7k 6.60 21.93
8k 6.26 22.05
9k 6.81 22.74
10k 7.67 14.76
15k 5.50 11.95
20k 5.70 13.29
25k 6.58 15.33
30k 7.68 17.28
35k 9.08 18.78
40k 10.23 18.05
45k 11.35 17.15
50k 11.38 16.33
55k 9.73 14.77
60k 6.97 12.40
Max power @45kHz / 3.7V =2.68W
Max power @ 9kHz / 7.4V =W